Download Print this page

Crumb Tray; Cleaning And Maintenance - Salton elite Toaster User Manual

Advertisement

7. If you need to reheat already toasted bread, place the bread into the slots, press
down the carriage handle and then press the reheat button . The light next to the reheat
button will go on .The bread will pop up automatically.
NOTE : Changes to the browning control will not change the reheat time.
8. To use the bun warmer, press down the bun warmer button to elevate the bun
warmer racks, choose the desired browning degree, place the buns on the bun warmer
racks and press down the carriage handle. When the carriage handle pops up, the buns
are ready.
9. Always ensure that the bun warmer racks are down when toasting bread
in the slots, Never use the bun warmer and toaster at the same time.

CRUMB TRAY

Your toaster comes with a removable, slide out crumb tray. This is a quick and
convenient way to remove crumbs. Always ensure that the toaster is unplugged
and has cooled down before removing the crumb tray. Clean the crumb tray with
a damp cloth and always dry the tray properly before replacing it into the toaster.

CLEANING AND MAINTENANCE

1. Always ensure that the toaster is unplugged and allow the unit to cool down
before cleaning.
2. Never immerse the toaster into water or any other liquids
3. Slide out the crumb tray and clean as described above.
4. To clean the exterior of the toaster, wipe with a soft damp cloth and dry thoroughly.
Never use any abrasives or harsh cleaning products to clean the toaster.
5. Do not stick any sharp objects into the toaster.
SERVICE
Hints before retuning for service:
1. Has the plug been wired correctly and are the wires tight under their screws ?
2. Is your household socket working properly ?
If service becomes necessary within the warranty period the appliance should be
returned to an approved Amalgamated Appliances (Pty) Ltd service centre.
Servicing outside the warranty period is still available but this will be
chargeable.
WARNING : THIS APPLIANCE MUST BE EARTHED
Always ensure that the three pin plug is connected as follows :

Advertisement

loading