Advertisement
communication. If Powerline communication
is disabled, use the Factory Reset button to
return the Powerline adapter to its factory
default settings.
a
Make sure that the Power LED is solid
green on each Powerline adapter.
b
On the first Powerline adapter, press the
Security button for 2 seconds, and then
release the button. The Power LED
blinks green while the adapter is setting
up security.
c
Within 2 minutes, go to the second
Powerline adapter and press its
Security button for 2 seconds, and then
release the button.
After a few seconds the security is set and
the Power LED turns solid green. The
adapters can communicate over the
Powerline network in a secure way.
5
Advertisement
