Download Print this page

on networks Powerline 500 Plus Installation Manual

Home network adapter

Advertisement

Quick Links

Easy, Reliable & Secure
Powerline 500 Plus
Home Network Adapter
I ns tal lation G uid e

Advertisement

loading

Summary of Contents for on networks Powerline 500 Plus

  • Page 1 Easy, Reliable & Secure Powerline 500 Plus Home Network Adapter I ns tal lation G uid e...
  • Page 2: Led Descriptions

    LED Descriptions Item Description • Solid green. The electrical power Power LED is on. • Solid amber. The adapter is in power saving mode. • Blinking green. The adapter is in the process of setting up security. • Off. There is no electrical power. •...
  • Page 3: Button Descriptions

    Button Descriptions Security Ethernet button port Factory Reset button Item Description Factory Press the Factory Reset button for 1 Reset button second, then release it to return the Powerline adapter to its factory default settings. Security After you plug in your new Powerline button Network AV adapter, press the Security button for 2 seconds.
  • Page 4: Install Your Powerline Adapters

    Install Your Powerline Adapters To set up your Powerline network:  Plug one of the Powerline adapters into a wall outlet near your router or gateway. Connect the Powerline adapter to the LAN port of the router or gateway using an Ethernet cable.
  • Page 5 communication. If Powerline communication is disabled, use the Factory Reset button to return the Powerline adapter to its factory default settings. Make sure that the Power LED is solid green on each Powerline adapter. On the first Powerline adapter, press the Security button for 2 seconds, and then release the button.
  • Page 6: Safety Information

    Safety Information • For national approvals (approval schemes other than CB), relevant national standards for plug, socket-outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to national standards. • AC input rating (NA): 100–125V, 0.2A (Max); 50–60 Hz excluding socket outlet rating.
  • Page 7 • Only power cords are allowed to be inserted into the filtered AC outlet. No other equipment with a direct plug-in is allowed. Power cord needs to be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area.
  • Page 8 tools, space heaters, fans, hair dryers, ovens, or refrigerators.
  • Page 9 Support Thank you for purchasing this On Networks product. After installing your device, locate the serial number on the label of your product and use it to register your product at http://support.on-networks.com/register. You must register your product before you can use our telephone support.
  • Page 10 On Networks 6455 East Johns Crossing Suite 230, Duluth, GA 30097 April 2013...