Led Indicator Positions; Power Supply; Back-Up Batteries; Time Setting - inStudio Prescott Instruction Manual

LED Indicators
A
I

Power Supply

• The unit is designed for AC 120V~60Hz power supply.
• Do not connect the unit to any other power supply to avoid damage that is not covered by your warranty.
• Disconnect from power when not in use.

Back-up Batteries

Insert two "AAA", 1.5 V batteries. Please observe the correct polarity marked inside the battery compartment
("+" and "-") . Preferably use alkaline batteries . In case of power failure the battery will keep the alarm and
time settings without displaying them . In the event of a power failure the radio and CD operation will stop .

Time Setting

1 . Connect the power plug to a wall socket .
2. The display will flash 12:00 after connecting to the power source for the first time.
3. Press and hold the button >>I / HOUR for fast setting or tap it briefly to increase the setting by one hour.
4. Press and hold the button I<< / MINUTE for fast setting or tap it briefly to increase the time setting by one
minute .
5. Press the CLOCK ADJ button once to confirm. The time indication stops flashing.
6 . To adjust the 12 or 24 hour time format press and hold the CLOCK ADJ button for 2 seconds . The display
shows either 12H or 24H .
Note: If the clock was set before, press the CLOCK ADJ button once. The adjusted time flashes on the
display; continue on to step 3 .

Headphone Jack

The 3 .5 mm mini stereo plug is provided for headphone listening . Connect your headphones (not included)
for private listening . When connecting the headphones the speakers are automatically muted .
B C
H G F E D
A . ALARM 1: Alarm 1 activated
B . POWER: Turned on
C . RANDOM: Random playback activated
D . PM: 12 hours time format activated
E . SNOOZE: Snooze activated
F . REPEAT: Repeat function activated
G . PROGRAM: Program function activated
H . SLEEP: Sleep function activated
I . ALARM 2: Alarm 2 activated
3