Inserting Batteries Into The Remote Control; Initial Setup - Sony Bravia KDL-55V5100 Operating Instrcutions

-
+
Push to
open
Inserting Batteries into the Remote Control
Insert two ize AA batterie (upplied) by
matching
0
and
0
on the batteries to the
diagram in ide the battery compartment of
the remote control.
Initial Setup
The
Initial Setup
screen appears when you turn on the TV for the first time.
During this initial setup, you can perform the following:
1
Select the language for the on-screen display text.
2
Select HOME or
Retail
mode.
3
Connect cable or antenna, then elect
OK
to run
Auto
Program.
p
• If you have cable and antenna available, plea e connect cable first.
• IMPORTA T: Auto Program is only effective when cable or
antenna is connected. If you cancel Auto Program before completion some channels may not be
available.
4
Auto Program
will scan for available channels from the signal source directly connected to
the TV' CABLE/ANTENNA input and may take sometime to complete the process. Follow
the help text provided on the screen to run
Auto Program.
~
Suggestions
• When prompted to select
HOME or Retail, be sure to elect
HOME for ENERGY STAR compliant mode.
• If you u e both cable without a box and antenna connections,
use an A-B RF switch (not upplied). For more detail ee the
online Reference Book.
• Select your preferred aspect ratio for the screen display.
Pre s WIDE to elect the wide mode or press MENU and
set the
Auto Wide to On under the Screen menu.
• To change the clock, pre
MENU and go to Setup menu
then elect
ClockfTimers and adju t Current Time.
11