Combine Devices - Hantek DDS-3X25 User Manual

Combine Devices

To generate the combine device waveforms, please do these steps as follows:
For example, we have two devices.
1. Connect them USB by the cable.(Caution: You must connect one device
to the main interface of cable!).
2. Connect them to Oscilloscope.
3. Connect them to PC.
4. Open the two devices by software.
5. You can see the device serial number in the status.
6. Change the "Phase" of "Device 2" to "0.5".
DDS-3X25 USB User's Guide
DDS-3X25 USB
27