Generate The Simple Waveform - Hantek DDS-3X25 User Manual

Generate the Simple Waveform

To generate a simple waveform, please do these steps as follows:
1. Connect wave output pin to Oscilloscope.
2. Connect the USB probe to PC.
3. Select "Start"->"All programs"->"DDS-3X25 USB"->"DDS-3X25 USB" to
open the interface.
4. Then you can see a 1 KHz, 2 V max, sine waveform on Oscilloscope.
DDS-3X25 USB User's Guide
DDS-3X25 USB
25