Table of Contents
Advertisement
Initial Setup
Digital-In
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a 480p picture
signal is being input to the DIGITAL-IN terminal.
This option adjusts the position when a 480p picture signal is being displayed on the screen.
There are two types of 480p picture signals: 640x480 and 720x480. If the displayed picture is
slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M
To DIGITAL-IN
To enter
To select SIZE1 or SIZE2
Press the M
Note:
The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the
Digital-In terminal and the picture is being displayed on the screen.
TV Speaker
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the M
To TV SPEAKER
To turn the TV's speakers ON or OFF
Press the MENU button when finished
Notes:
• Before you turn the TV speaker setting from OFF to ON, make sure that the TV volume
level is low! If the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV speaker settings will return to "ON".
44
button
ENU
button to finish
ENU
button
ENU
Advertisement
Table of Contents
