Operation/Configuration; Menu Structure - Bargeheights LED PAR User Manual

4. OPERATION/CONFIGURATION

We here at Bargeheights don't really care for DIP switches.
They are hard to see in the dark, and since most of us don't
quickly think in binary, they are tricky to set properly. The
LED PAR has an LED display with a simple menu system. There
are four control buttons below the display that allow you to
navigate the control menus.
8888
MENU DOWN
<MENU> – Go up a level in the menu system; hold to confirm
<DOWN> – Scroll to the next lower number or menu selection
<UP> – Scroll to the next higher number or menu selection
<ENTER> – Select the current number / menu selection
To access the main menu press the <MENU> button. Use the
<UP> or <DOWN> buttons to navigate through the menu
options. Press the <ENTER> button to select the option dis-
played, and use the <UP> or <DOWN> buttons to change the
settings. Once your changes are made press <ENTER> to ac-
cept the change. Hold <MENU> for three seconds to con-
firm the settings change.
If the LED PAR menu remains static for more than eight sec-
onds it will automatically return to its last setting. To exit the
menu without making any changes press the <MENU> button.
Page 8
UP ENTER
LED 36 User Manual rev. A

Menu Structure

Addr 1-512
Soun
coLo
ShNd
Fade
auto
ChNd 1Ch-7Ch
Nast
Noff
sLNd
SL 2
SL 1
on
Led
off
off
Idsp
on
red
baLa Gree
bLue
©2010 Bargeheights, Inc.
DMX Address Setting
Sound Control Mode
Color Selection Mode
Color Fade Mode
Auto Operation Mode
DMX Channel Mode (1Ch - 7Ch)
Master Mode
Control OFF
Slave Mode 2
Slave Mode 1
Rear LED Display On
Rear LED Display Off
Rear LED Display Normal
Rear LED Display Flip
RGB Balance Mode -
0-255
Red Level
RGB Balance Mode -
0-255
Green Level
RGB Balance Mode -
0-255
Blue Level
Page 9