Technical Data - Telefunken RT200 User Information

In contrast to the RT300 and MT1, the other digital tuners in the Silver Line, the RT200 does not allow
entering a frequeny via the numeric keys. Note that '16 program memory places' means 8*FM and 8*AM;
you can't have more places in one range and less in the other!
Features
UKW/MW, 16 program memory places, manual and automatic station search, PLL tuning system, LED
signal strength indicator, exact tuning indicator, digital timer clock, mono switch, AFC (switchable)
Connectors
AF Output (DIN and Cinch), Antenna (75 Ohms asymmetric 240 Ohms symmetric AM/FM), 2 switched
outlets for timer operation

Technical Data

(taken from the user's manual and the service manual; I took the values from the service manual in case of
contradictions)
FM Receiver
Wave Band:
Circuits:
Sensitivity:
Limit Range:
Intermediate Frequency:
IF Bandwidth:
Selection:
Mirror Selection:
Capture Ratio:
Phase Suppression:
Carrier Signal Suppr.:
Frequency Response:
Distortion Factor:
Cross Talk Dampening:
Voltage Ratio:
S/N Ratio:
Range of Strength Display: 1 µV - 2 mV
Accuracy of Standards:
AM Receiver
Wave Band:
87.5 - 108 MHz
11, 4 adjustable
0.8 µV / 2.6 µV Mono/Stereo
at 26 dB at 75 Ohms
1.6 µV / 5.2 µV Mono/Stereo
at 26 dB at 300 Ohms
<1.0 µV for -3 dB at 75 Ohms
10.7 MHz
160 kHz
65 dB (2 signal method)
>=70 dB
<1 dB
>55 dB
>70 dB
10 Hz - 16.0 kHz
<0.5 % stereo
<0.3 % mono
at 1 kHz and 40 kHz deviation
>38 dB at 1 kHz
>30 dB at 12.5 kHz
>62 dB stereo (eff)
>65 dB mono
>64 dB stereo
>67 dB mono
0 digit for station frequency in 50 kHz steps
MW 522 - 1611 kHz