Setting Up The Remote Control; Inserting Batteries - Amino AmiNET125 Installation Manual

AmiNET125 User Guidev1arial.qxp
Setting up the Amino remote control
This section explains how to unpack and set up the Amino remote control.
Your service provider may have supplied an alternative remote control, in which case please refer
to the User Guide supplied by your service provider for instructions on setting up and using the
remote control.
The front window of the remote control is covered with a protective clear plastic film, which should
be removed and disposed of prior to use.

Inserting batteries

The remote control requires three batteries type AAA, MN2400, UM-4, or LR03.
For best performance we recommend using Alkaline batteries.
• Open the battery cover by pushing
lightly on the recess and sliding
the cover downwards:
31/07/2006 11:44 Page 9
• Insert the batteries, taking care to
observe the correct polarity:
• Replace the battery cover by
sliding the cover upwards until it
clicks into place:
"click"
9