Connecting Video; Connecting Audio - Amino AmiNET125 Installation Manual

AmiNET125 User Guidev1arial.qxp

Connecting video

The AmiNET125 provides the following video outputs:
• Component Video (Y, Pr, Pb), which gives the best picture quality.
• RGB SCART is used primarily in Europe and provides equivalent quality to Component
• S-Video, which gives good picture quality.
• Composite Video (CVBS), which gives standard picture quality.
• RF, which gives the same quality as broadcast TV.
Use the highest quality connection available on your other equipment.
• Your Service Provider will supply a SCART, Component or combined S-Video/Composite cable
with the AmiNET125. If your TV has different inputs from the lead supplied, please contact your
Service Provider for an alternative.
• If your television only provides an RF input the AmiNET125 will deliver a good picture on the
appropriate TV channel, as selected on the AmiNET125 Setup screen. The RF connection also
supplies the audio, so a separate audio connection is not required.

Connecting audio

The AmiNET125 provides the following audio connections:
• Left and right audio for stereo sound (on the AV output).
• S/P DIF digital output for high quality surround sound, when used with an external decoder and
amplifier (not supplied).
If you are using the Component Video, S-Video, or Composite Video outputs you should connect
the audio left and right connectors included in the lead to the television or AV amplifier to provide
sound.
31/07/2006 11:44 Page 7
7