Miele T 5206 Operating And Installation Instructions page 27

The following materials are suitable
for the exhaust ducting:
– galvanized steel
– plastic ducting
– flexible ducting.
Note that all ducting must be of a
suitable heat resistant specification.
Install the exhaust ducting so that
the expelled exhaust air cannot be
sucked into the machine again.
Standard accessories include an
adapter for the exhaust ducting:
Application:
In installations where conditions do not
allow the machine to be permanently
connected to a ducting system.
Purpose:
The adapter enables rapid, simple con-
nection or disconnection of the exhaust
ducting.
Installation:
The adapter is fitted to the non-con-
nected end of the vent duct.
Important
Connection must not be made to a
flue used by gas or solid fuel boilers
or heaters.
Installation - venting
27