Laptop / Notebook / Desktop Users: Installing Your Hard Drive Into The 2.5" Usb Drive Enclosure P P P G Y; Limited Warranty Terms; Limited 3-Year Warranty Terms - Verbatim 2.5” SATA Solid State Drive Detailed Installation Manual

7. Locate the drive corresponding to the SSD and copy the NTI Echo installer (setup.exe) and the installation guide (Installation Guide.pdf)
to your desktop for future reference.
8. Launch the NTI Echo installer (setup.exe), following the on screen prompts.
9. After installing the NTI Echo software, launch the NTI Echo program, from the windows start menu or by accessing the NTI Echo desktop
shortcut.
10. Confi rm the source (your HARD DRIVE) and the destination drive (Verbatim 2.5" SSD) has been properly selected.
Note: indented options (if shown) on the source pull down menu are partitions on your HARD DRIVE. Selecting one of these options will clone only the selected partition to the Verbatim
SSD, not the entire source drive.
11. If you want to save space on the destination drive (for example, you are replacing a desktop HARD DRIVE with a smaller capacity SSD boot
drive), you may exclude any unwanted fi les from the cloning process using the fi lter option.
12. Press START to begin the cloning process. Acknowledge the warning message that your PC will restart and the cloning operation will
begin.
Note: to begin the cloning process your PC will boot up in Linux OS. Some error messages may be displayed momentarily during the Linux boot sequence. This is normal and can be
disregarded.
13. During the cloning process, status and remaining time can be viewed on the displayed progress bar.
14. After the cloning operation is completed, you may leave your HARD DRIVE installed in your desktop PC if desired and use your Verbatim
2.5" SATA SSD as your primary or boot drive. If you choose to remove your HARD DRIVE, shutdown the system, remove the access panel(s)
and remove the HARD DRIVE from the drive bay, disconnecting the SATA and power cables as required and re-install the access panel(s).
15. You will need to select the Verbatim SSD as your boot drive in your system BIOS settings. Restart your system, pressing required keys
(normally F12) as directed to interrupt the normal booting process and access your system BIOS settings. After selecting the Verbatim 2.5"
SSD as your primary boot device, save your revised BIOS settings and exit the BIOS menu. Your Verbatim SSD is now confi gured as your
primary boot device and is ready for use.
Laptop / Notebook / Desktop Users: Installing your HARD DRIVE into the 2.5" USB drive enclosure
If desired, your original HARD DRIVE can be now placed in the 2.5" USB drive enclosure and used as a removable hard drive, or simply
retained as a spare or backup drive.
1. Re-attach the bridge board to your HARD DRIVE's SATA connector, being careful not to damage any components.
2. Place the HARD DRIVE in the 2.5" USB drive enclosure. Plug in the mini USB cable to ensure top cover is properly positioned in next step.
3. Place the top cover in position aligning the cutout over the mini USB connector and press into place. The cover will snap together. (Note:
once the cover is snapped in place, it cannot be removed without damaging the case.)
4. Connect the other end of the USB cable to your USB port when you are ready to use this device.
Note: It is recommended to retain the original data on the HARD DRIVE until you are certain the new installation is working properly, and that all necessary fi les have been transferred.
Note: If at any time you experience diffi culty, you may reinstall your original HARD DRIVE into your machine, and bring your system back to its original state before installing the SSD.
Note: The NTI Echo software may be uninstalled if desired from your SDD after the installation is completed, using the Add/Remove Program feature contained in Windows Control Panel.

Limited Warranty Terms

Verbatim Limited warrants this product to be free from defects in material and workmanship for a period of 2 years from date of
purchase. This warranty excludes batteries. If this product is found to be defective within the warranty period, it will be replaced at no
cost to you. You may return it with your original cash register receipt to the place of purchase or contact Verbatim.
Product replacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage resulting
from abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific computer
software or hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific legal rights and
you may also have other rights which vary from state to state or country to country.
NOTE: Verbatim Limited may at any time revise the content of this user guide without further notice.

Limited 3-Year Warranty Terms

The Verbatim Americas, LLC warranty obligations for this hardware product are limited to the terms set forth below:
Verbatim warrants its products to be free of defects in material and workmanship under normal use and service for a period of 3 years from the date
of purchase. Verbatim's sole obligation with respect to claims of non-conformance made within the warranty period described above shall be, at its
option, to repair or replace any item of Equipment that Verbatim, in its sole discretion, determines to be defective, subject to the procedure set forth
below.
5