Honda Accord Sedan 2001 Owner's Manual page 302

Main Menu Table of Contents
JACKING POINT
9. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
WHEEL WRENCH
10. Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
DX and LX models:
Do not attempt to forcibly pry the
wheel cover off with a screwdriver
or other tool. The wheel cover
cannot be removed without first
removing the wheel nuts.
EXTENSION
11. Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
Placing the wheel face down could
mar its finish.
Taking Care of the Unexpected
Changing a Flat Tire
CONTINUED