Honda Accord Sedan 2001 Owner's Manual page 240

Main Menu Table of Contents
WASHER DRAIN BOLT
4-cylinder models
2. Open the hood and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
WASHER
DRAIN BOLT
6-cylinder models
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
Engine Oil
OIL FILTER
4-cylinder models
4. Install a new oil filter according to
instructions that come with it.
5. Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:
33 Ibf.ft (44 N.m , 4.5 kgf.m)
Maintenance
CONTINUED