Page 5
6. High 5. Low 4. Volume 2. Line Inputs 3. Aux In 1. Mic Inputs 7. Master Volume 8. POWERLINK In 9. POWERLINK Out 10. Subwoofer Out 11. Power 12. AC Power Cord Receptacle...
Page 6
MASTER volume controls the loudness of the mix through its PW100T. It does not affect volume of linked PW100T. This jack may also be used to connect the PW100T to a power amp with a balanced line input. Note: The shield connection (pin 1) on this jack does not connect to chassis ground.
Page 7
4kHz and above , 800Hz and below. Channel EQ (high, low) Both jacks accept a balanced input and sends a pre-master volume output mix of SYNC (IN and OUT) channels. Recommended use: Linking two PW100T's together. Subwoofer Out Line Out 20Hz-150Hz.
Tel: 1-859-817-7100 Fax: 1-859-817-7150 Declare that the product Product name: Powerwerks Product model number: PW100T to which this declaration relates is in conformity with the following standards; EN55013: 2001/+A1: 2003+A2: 2006 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.
Need help?
Do you have a question about the PW100T and is the answer not in the manual?
Questions and answers