Advertisement
Installing your software onto your PC
Once your USB modem is connected, you may have to wait a few minutes before anything
happens (about the time it takes a kettle to boil). Then:
>
Read and accept the User Licence Agreement, if it pops up
>
Follow the Wizard and the software will be installed automatically
(Don't follow the Windows Driver Installation Wizard
if offered because that won't fully install the software)
The software takes a few seconds or a few minutes to install, depending on your computer
(about the time it takes to drink a cup of tea or coffee).
Installing your software onto your Mac
Once your USB modem is connected, you should see a 3Connect icon
your desktop. Click on it. Then:
>
Open the 3Connect Installer software
>
Read and accept the User Licence Agreement, if asked
>
Enter your password or admin log in, if asked
The 3Connect software will be automatically installed in your Applications folder.
Troubleshooting tip: Your computer can't detect
your dongle? Try inserting it into another free USB port.
0822801 E156G USB Modem UG.aw(B)8 8
on
7
25/9/08 10:03:12
Advertisement
