Ec Declaration - Tesira Tec-1i Operation And Installation Manual

EC Declaration of Conformity
Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares
that our delivered version the following described product complies with the applicable
provisions of the DIRECTIVES below except as noted herein. Any alterations to the product
not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration.
Brand Name:
Product Description:
Models:
Applicable EC Directives:
LVD Directive (2006/95/EC)
EMC Directive (2004/108/EC)
RoHS Directive (2011/65/EU)
Special Considerations for Product Environment or Compliance:
• Use only PoE Insertion Devices that are CE Marked, certified to local regulations, and
appropriately rated Type 1 PoE or Type 2 PoE Plus (IEEE 802.3at).
• Shielded cabling must be used for system connections.
Technical Construction File, Location and Contact:
Biamp Systems Corporation
9300 S.W. Gemini Drive
Beaverton, OR USA 97008
Authorized Representative:
Authorized Signature:
Date and Place Issued:
EC DECLARATION OF CONFORMITY
®
Tesira
Remote Audio Controls for Networked Audio DSP Platform.
TEC-1i, TEC-1s
Applicable Harmonized Standards:
Safety
Emissions
Immunity
RoHS Recast
phone:
fax:
e-mail:
Larry Copley, Compliance Engineer
May 2012, Beaverton, Oregon USA
17
EN 60065:2002
IEC 60065:2001 + Amd 1:2005
EN 55103-1:1996, Environment E2
EN 55103-2:1996, Environment E2
(503) 641.7287
(503) 626.0281
compliance@biamp.com
DoC TEC-201205d