Page 1
Proper Battery Usage* Merchant when you first plug in your unit allow the battery to charge for at least 12 hours before you unplug it, after that time we recommend allowing the unit to discharge ¾’s of the way, that is to say let the battery go ¾’s the way down before you charge it again.
Page 2
Installing / Removing Paper Roll Removing an Empty Paper Roll: 1. Remove the paper compartment cover by grasping it on both sides and lifting it towards you and upwards. 2. Remove the paper roll core and spindle. Discard the core but save the spindle to be used w/ a new paper roll.
NURIT 30XX / 8320 E UIDE 4.80 PPLICATION AND HIGHER ETAIL AND ESTAURANT Cards are swiped with magnetic stripe down and to the right. They can be swiped either top to bottom or bottom to top. CREDIT CARD PURCHASE ERMINAL ROMPT CTION Idle Prompt...
Page 4
VOID ERMINAL ROMPT CTION Idle Prompt Press VOID until terminal displays VOID/SALE, VOID/FRCD or VOID/RTRN prompt. Void Swipe card or manually enter credit card number. ENTER Expiration date (manual) Enter card expiration date (MMYY). ENTER Amount Enter amount. ENTER Second Receipt Press any key to print the second receipt.
Page 5
PRINT LAST MERCHANT RECEIPT ERMINAL ROMPT CTION Idle Prompt Press the ALPHA key. Receipt Menu Presst 3 to print the last merchant receipt. Not Available The last receipt is not available to print. A cancelled or declined transaction can void this function. PRINT LAST CUSTOMER RECEIPT ERMINAL ROMPT...
CLOSE CURRENT BATCH ERMINAL ROMPT CTION Idle Prompt Press the FUNCTION key. Function Menu Press 2 to start the batch process. You may be prompted that the terminal has open tabs or untipped transactions. Close all open tabs. Open Tab or Untipped Scroll through untipped transactions adding tips where necessary.
Page 7
TO TURN STORE AND FOWARD(AKA OFFLINE) ON AND OFF TERMINAL SCREEN SAYS DO THIS Credit ….Sale Account ---> Press [Menu/ Esc] Key Menu Screen: Press the [Force] Key til you see #3 Merchant Options, Then press [Enter]. 1. Reports 2. Merchant Params The password is the two digit day and two digit month of the current Enter Password: day.
Page 8
TO UPLOAD STORED TRANSACTIONS FOR PROCESSING TERMINAL SCREEN SAYS DO THIS Credit ….Sale Account ---> Press Menu/ Esc Key Press the Force Key till you see #3 Merchant Options, Then press Enter. Menu Screen: 1. Reports 2. Merchant Params Merchant Options: Press the [Force] Key till you see #10 Store and Forward, then press [Enter].
Page 9
TO ADD AN EXCHANGE PREFIX FOR DIALING OUT TERMINAL SCREEN SAYS DO THIS Credit ….Sale Account ---> Press Menu/ Esc Key Press the [Force] Key til you see #8 COMM MENU, then press [Enter]. Merchant Options: 1. Paper Type 2. No-Paper Mode Press the [Force] Key til you see #3 Exchange pref>, then press [Enter].
Page 10
Common Error Responses, and Quick Fixes* *Warning: You may damage programming in terminal if directions are not followed correctly! Invalid Batch Sequence: (All Nurit Terminals except for 8000 GPRS) Display 1. Credit Sale Account Press Menu 2. Menu Screen Press #4 (Host Params) 3.