Maintenance; Safety Precautions; Routine Maintenance - Century INVERTER ARC 120 Operator's Manual

D-1

SAFETY PRECAUTIONS

WARNING
ELECTRIC SHOCK
• Have an electrician install and serv-
ice this equipment.
• Turn the input power off at the fuse
box, disconnect supply lines and
allow machine to sit for five minutes
minimum to allow the power capaci-
tors to discharge before working
inside this equipment.
• Do not touch electrically hot parts.
------------------------------------------------------------

ROUTINE MAINTENANCE

The frequency of the maintenance operations may
vary in accordance with the working environment.
Any noticeable damage should be reported immedi-
ately.
• Check cables and connections integrity. Replace, if
necessary.
• Clean the power source inside by means of low -
pressure compressed air.
• Keep the machine clean. Use a soft dry cloth to
clean the external case, especially the airflow inlet /
outlet louvers.

MAINTENANCE

Do not open this machine and do not introduce any-
thing into its openings. Power supply must be discon-
can kill.
nected from the machine before each maintenance
and service. After each repair, perform proper tests to
ensure safety.
Power supply must be disconnected from the machine
before each maintenance and service. Always use
gloves in compliance with the safety standards.
------------------------------------------------------------
INVERTER ARC™ 120
WARNING
CAUTION
D-1