Advertisement
Quick Links
Advertisement
Related Manuals for Bigben Ceberbike 2
Summary of Contents for Bigben Ceberbike 2
- Page 1 READ THIS FIRST...
- Page 2 PS3™ Cyberbike™ Quick start Guide 1. Assemble the Cyberbike™ as instructed in Section 2a of the instruction book. Ensure that you connect the cables inside the handlebar and seat posts. Please use a Phillips screwdriver to make sure the screw for the left handle is fully screwed in before use. FRONT BACK 2.
- Page 3 4. Attach the USB cable to the Cyberbike™ and the PS3™ console. 5. Press the home button to sync the Cyberbike™ to the console Check that your handlebars are centred correctly and turn on your console. If you experience any problems with your Cyberbike™ please follow the following points and refer to the main instruction book.
-
Page 4: Troubleshooting
Troubleshooting The vehicle/character fails to move on the screen when you are pedalling on the Cyberbike™. • Check that all cables are properly connected inside the Cyberbike™. See section 2a. • Check that the PS3™ / Cyberbike™ mode switch is in the desired mode. See section 4c. •... - Page 5 www.bigben.eu...