3D Sound Function - JVC LT-26D50BJ Instructions Manual

LT-32&26D50BJSJ_Eng.book Page 21 Thursday, October 7, 2004 4:42 PM
• The visible area adjustment is saved even
after the TV channel is changed.
However, it is cancelled if the following
operations are performed.
– The power is turned off/on
– The ZOOM mode is changed
– The X (Multi) button, f (Freeze)
button, or g (Text) button is pressed
– The TV is switched between TV mode
and EXT mode
• Some menu displays can be cut off when
you move the visible area up or down
while watching Digital terrestrial
broadcasting (DVB-T).

3D SOUND function

You can enjoy sounds with a wider
ambience.
• This function does not work for the sound
from headphones.
Press the 3 button to select one of
3D SOUND modes
HIGH/LOW:
When you listen to stereo sound, please
select HIGH or LOW mode.
You can enjoy sound similar to the
experience at the theatre.
When you combine the functions of A.H.B.
and BBE, you can enjoy more powerful
sound.
• When you set the 3D SOUND function to
HIGH mode, there may be slight volume
distortion. If that occurs, please switch to
LOW mode. The effect of 3D SOUND
functions will be less noticeable, but the
volume distortion will be corrected.
MONO:
Select the MONO mode, when you listen to
the mono sound.
You can enjoy the sound for a wider
audience similar to stereo sound.
OFF:
The 3D SOUND function switches off.
• You can choose the 3D SOUND mode
with the "SOUND menu" (see page 49).
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH
Basic operations (Remote control)
21