SAXO - All Types
Front height
Reminder : Measuring the front height
H1 = Distance between the ground and the mounting face of the fixings
B3BP07UC
The front heights H1 are measured between the ground and the moun-
ting face of the arm fixings (1) at the point «a».
B3CP02UC
AXLE GEOMETRY
Geometry of the axles at reference height.
H2 = Distance between the ground and the rear crossmember
B3BP07VD
The rear heights H2 are measured between the ground and the mounting
face of the rear crossmember (2) at «b» and «c».
316
Rear height
Reminder : Measuring the rear height
A < B = Positive figure :
A > B = Negative figure:
WARNING
+ =
TOE-IN
– =
TOE-OUT