SonicWALL TZ 170 Series Getting Started Manual page 8

2. Enter 192.168.168.168 (the default LAN management IP address) in the Location or
Address field.
3. The SonicWALL Setup Wizard launches and guides you through the configuration
and setup of your SonicWALL TZ 170.
If the SonicWALL Setup Wizard Does Not Appear
If you cannot connect to the SonicWALL TZ 170 appliance or the Setup Wizard does
not display, verify the following configurations:
• Did you correctly enter the SonicWALL TZ 170 management IP address,
192.168.168.168, in your Web browser?
• Is your computer running pop-up blocking software?
• Are the Local Area Connection settings on your computer set to obtain an IP
address dynamically (DHCP) or set to a static IP of 192.168.168.20? See
"Configuring Computers for Your Network with DHCP" on page 20 for instructions
on changing your Local Area Connection settings.
• Do you have the Ethernet cable connected to your computer and to one of the
LAN ports (1 through 5) on your SonicWALL TZ 170?
• Some browsers may not launch the Setup Wizard automatically. In this case, log
into SonicWALL TZ 170 using "admin" as the user name and "password" as the
password. After you log in, click the Wizards button on the System > Status
page. Select Setup to begin configuring your SonicWALL TZ 170.
• Some popup blockers may prevent the launch of the setup wizard. You can
temporarily disable your popup blocker, or add the management IP address of
your SonicWALL (192.168.168.168 by default) to your popup blocker's allow list.
SonicWALL TZ 170 Getting Started Guide Page 7