Installation; Cable Connection - Mace CAM77 Instruction Manual

CAM77 2005.10.13 8:46 PM ˘ ` 12

Installation

12
Digital Day&Night Vandal Dome
mac001 600DPI 100LPI
1. Dome Base Mounting
- Open the dome cover by unscrewing 3 screws using special
wrench provided.
- Mount the base of camera to a sturdy surface using 4 screws (1.5
inch) and 4 premade holes on the base of the dome.
2. Power Connect & Monitor Impedance
- AC24V Class 2 power supply.(AC24V/DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75Ω. Check the impedance
switch when the screen turns blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction
and angle of camera.
- Make sure to retighten the screws for camera bracket.
- Set any function you wish to activate by using the OSD buttons.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten 3 screws.

Cable Connection

AC24V/DC12V
AC
DC
13
AC
DC
Digital Day&Night Vandal Dome