Camera User Guide. * Image transfer is only possible between PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with upgraded firmware. * Images are transferred from one camera to another camera. Images cannot be transferred between more than 2 cameras.
Transferring Images via a Wireless Connection Registering Your Camera Name First, select a name for your camera and register it. Slide the mode switch to (Playback) (Wireless) Menu [Set Camera Name] Refer to the Camera User Guide for your camera for details on Menu operation.
When the name of the target camera and [Registration completed] are displayed, press If the name is already registered, [Already registered] will be displayed. If you have failed to register, go back to Step 1 and repeat the procedure. Connecting Cameras via a Wireless Connection Connect your camera to the registered target camera via wireless.
Transferring Images One by One You can transfer images one by one to a target camera connected via a wireless connection. Confirm that the cameras are connected via a wireless connection. For instructions on how to connect the cameras via a wireless connection, please refer to Connecting Cameras via a Wireless Connection (p.
Select [Transfer] and press If you have not selected the images for transfer order in advance, specify the images with [Order] or [Mark all] and select [Transfer]. Transfer of images will begin. The wireless lamp and the button will blink blue. The transferring camera will display [Transferring] and the receiving camera will display [Receiving].
Troubleshooting Camera cannot be registered or wireless connection cannot be selected. Camera is in shooting mode Change to Playback mode Unable to register the target camera in your camera. Registration limit exceeded in [Target A maximum of 7 new target devices can be Device] registered in [Target Device].
CDP-E055 ©2006 CANON INC.