Digital-In; Digital-In1 Audio - JVC LCT2104-001B-A User Manual

Onscreen Menus

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M
To DIGITAL-IN
π †
è
To enter
To select AUTO, SIZE1 or SIZE2
π †
Press the M
Notes:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.

Digital-in1 Audio

This feature is used if you have a DTV or HDMI compatible component connected to your TV.
Press the M
To DIGITAL-IN1 AUDIO
π †
è
To select ANALOG, DIGITAL or AUTO
Press the Menu button when fi nished
Notes:
• If you connect the HDMI device to the HDMI 1, choose
DIGITAL. If you connect the DVI device to the HDMI 1,
choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
• When you select DIGITAL, select PCM on Digital Sound menu. See page 54.
52
button
ENU
button to finish
ENU
button
ENU
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN1 AUDIO
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN1 AUDIO
NEXT PAGE
SELECT OPERATE
SIZE1
DIGITAL
(1/5)
EXIT
MENU
SIZE1
DIGITAL
(1/5)
EXIT
MENU