Cable Holder; Remove The Terminal Cover; Tv Rear Panel; Cable Or Antenna - JVC LCT2104-001B-A User Manual

Cable Holder

A cable holder which keeps your connection cables tidy is attached on the back of the stand.
To open, loosen the screws with you fingers. After putting the cables in the cable holder, attach
it to the back of the stand again by tightening the screws with your fingers.
LT-40X887, LT-40X787
LT-40X667

Remove the terminal cover

There are connection terminals behind the cover on the left in the back
of the TV. Remove the cover before connecting an antenna or other
devices. The cover can be removed by removing the hooks. When
replacing the cover, place the side of the cover against the TV and
insert the hooks.
Note:
• Leave the terminal cover off if they do not fit properly. Do not force
to replace the cover. Doing so may damage the connection cables
and cover.
No VCR Connection

Cable or Antenna

Output
LT-37X887, LT-37X787
LT-37XM57
Coaxial Cable
(Attachment)
Quick Setup
LT-32X887, LT-32X787,
LT-32X667

TV Rear Panel

13