Navigation System - Mazda 3 Quich Start Manual

NAVIGATION SYSTEM

SETTING UP YOUR NAVIGATION SYSTEM
Your navigation system is ready to use straight away, however to ensure the best possible
experience we recommend that you update your SD card to ensure you have the latest software
and map data.
The navigation system comes with three years free map updates which commences after the
navigation has been used for approximately 63miles (100km).
UPDATING YOUR MAPS -
REGISTRATION AND MAZDA TOOLBOX
1. On your personal computer navigate to
mazda.co.uk/mazda3/navigation
2. Towards the top of the screen, click Register and follow
the on-screen instructions to set up an account. You can
subscribe to the newsletter to be kept up to date with
future map updates
3. Once you have registered you will be sent an email to
verify your email address. Please click the link in this
email to confirm your account
4. Navigate back to mazda.co.uk/mazda3/navigation and login to the site using your chosen
username and password by clicking Login at the top of the page
5. Select the MZD Connect system by clicking Choose
5. Click Download Toolbox to the right of the page and then click Download to download the
Mazda Toolbox
6. Once the Mazda Toolbox application is downloaded please launch the file and follow the
on-screen instructions to install the Mazda Toolbox
7. Mazda Toolbox should now start and ask you to insert your SD card.
UPDATING YOUR MAPS -
REMOVING THE SD CARD FROM THE CAR
1. To remove your SD card, ensure the car's ignition is OFF
2. Open the front armrest and lift the flap covering the SD
card slot
3. Gently push the SD card in, remove your finger and the
SD card can then be pulled out.
Please note:
The SD card slot is only for genuine Mazda Navigation map SD cards. Do not insert any other SD cards in to
the vehicle as it may cause damage to the vehicle and/or the SD card.
8
UPDATING YOUR MAPS - DOWNLOADING
AND INSTALLING MAP DATA
1. With the Mazda Toolbox application running, insert your
Mazda Navigation SD card into your computer's SD card
slot or SD card reader
2. You may be asked if you are happy to share anonymous
GPS logs and usage information. Please confirm or deny
this request
3. The application will then ask you to backup the data held on the SD card. This will ensure you
are able to restore your navigation data in the event of data corruption
4. Once the backup is complete, click Home and login using the username and password that you
registered previously
5. You may now be shown the main screen, to view available updates, click Updates on the
left-hand menu. If no updates are available Device will be shown rather than Updates. Click on
this to confirm your SD card data is up-to-date
6. If updates are available, click Install to download and install updates to the SD card
7. After confirmation the update has completed the system will inform you that your device is
up-to-date. You can then remove the SD card from your PC and install back in to the car.
Please note:
Ensure you have enough disk space to backup your SD card data and download any available map updates.
UPDATING YOUR MAPS - INSTALLING THE SD CARD IN TO THE CAR
1. Ensure the car's ignition is OFF
2. Open the front armrest and lift the flap covering the SD card slot
3. Gently push the SD card in, and when it clicks and remains in place, cover it with the flap
4. Turn the car's ignition on and press the NAV button to load the SD card.
Please note:
When installing the SD card in to the car, ensure the lock switch on the SD card is in the unlocked position.
9