j3 competition kosmic Manual page 10

Type Size Model
E 50x1030 DD
U 50x1030 DD
Q 50x1030 DD
50x1030 DD
N
H 50x1030 DD
HH 50x1030 DD
U 50x1030 GB
Q 50x1030 GB
N 50x1030 GB
H 50x1030 GB
HH 50x1030 GB
10. Tuning Bars (Front Torsion Bars)
Each chassis is supplied with a 'Flat' steel front torsion bar. This bar can be replaced
with three (3) additional round 30mm bars made of different wall thicknesses. The added
torsion bars come with a 1.0mm, 1.5mm, 2.0mm wall thickness. Each bar improves the
front-end effectiveness during changing track conditions. The 2.0mm is the stiffest,
which effectively allows the front-end to work better during high-grip levels; however, it
will require increased input and strength from the driver as well.
J3 Competition Inc. – Kosmic Owner's Knowledge Packet
Axle Chart
SOFT HARDNESS
Many J3 Team Drivers prefer the 1.0mm bar
Part Numbers Provided in the Picture
HARD Code
0054.G0E
0054.G0U
0054.G0Q
0054.G0N
0054.G0H
0054.G0HH
0054.H0U
0054.H0Q
0054.H0N
0054.H0H
0054.H0HH
10 | P a g e