Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ZEP dyna-mate 2
Summary of Contents for ZEP dyna-mate 2
-
Page 2: General Information
Read and understand all labels, MSDS, and this instruction manual before use. The Dyna-Mate II and Dyna-Mate II Air are designed to clean soiled, greasy, and oily parts, using Zep’s Dyna-143 or Dyna-170. Install your parts cleaner on a flat level surface, capable of supporting the load, in a well- ventilated area. -
Page 3: Environmental Precautions
3. Plug the power cord into a properly grounded 120V/60Hz outlet. A ground fault circuit interrupter protected outlet is preferred. 4. Fill the reservoir to just below the shelf (5US gallons) with Zep Dyna-143 or Dyna 170. DYNA-MATE II AIR 1. - Page 4 E. OPERATING INSTRUCTIONS FILTER SYSTEM OPERATION The Zep Dyna-Filtration system effectively removes unwanted greases and oils on a continuous basis for more effective cleaning and longer solvent life. The system consists of a 5100 filter that traps large particles, before it enters the Dyna-Trap filter bag.
-
Page 5: Changing The Filters
F. CHANGING THE FILTERS. This Zep parts washer is equipped with the new filter change indicator. During normal operation, the indicator remains green. As the filter traps more soil, the indicator will change from green to red. This color change indicates that the filter element needs to be replaced. - Page 6 DYNAMATE II ELECTRIC ITEM # PART # DESCRIPTION 55538 PUMP ASSEMBLY 8049 FILTER 8169 BRUSH 54402 DOOR CLOSURE 56905 STRAP, FILTER 01122 SWITCH, ROCKER 02081...
-
Page 7: Dynamate Ii Air
DYNAMATE II AIR ITEM # PART # DESCRIPTION 8843 PUMP, FLO-JET 01000 REGULATOR 8049 FILTER 8169 BRUSH 54402 DOOR CLOSURE 56905 STRAP, FILTER 02081...