License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2 9.
2. Push the left end of the lamp
assembly toward the right.
3. Turn the lamp assembly down to
remove it from the liftgate.
4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
7. Turn the lamp assembly into the
liftgate engaging the clip side
first.
Vehicle Care
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Exterior Lamp
License Plate Lamp
Rear Turn
Signal Lamp
Taillamp/Stop Lamp
For replacement bulbs not listed
here, contact your dealer.
10-27
Bulb
Number
194 LL
7443 NA
7444 LL