Bulb Replacement; Taillamps, Turn Signal, And - Chevrolet 2013 Traverse Owner's Manual

10-26 Vehicle Care

Bulb Replacement

For the proper type of replacement
bulbs, see Replacement Bulbs on
page 10 27.
For any bulb changing procedure
not listed in this section, contact
your dealer.
Taillamps, Turn Signal,
and Stoplamps
1. Turn Signal Lamp
2. Stoplamp/Taillamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2 9.
2. Remove the convenience net,
if the vehicle has one.
3. Remove the two taillamp screw
covers.
4. Remove the two screws holding
the taillamp assembly in place.
5. Pull out the taillamp assembly.
6. Turn the bulb socket
counterclockwise and pull it
straight out to remove it from the
taillamp assembly.
7. Pull the old bulb straight out of
the bulb socket.
8. Push the new bulb straight into
the bulb socket.
9. Push the taillamp assembly back
into its original location.
When reinstalling the taillamp
assembly, make sure the pin on
the taillamp assembly lines up
and is inserted correctly into the
opening of the vehicle.
10. Reinstall the two screws that
hold the taillamp assembly in
place.
11. Reinstall the two taillamp screw
covers.