TYPHOON Wireless Keyboard Optical Mouse Set User Manual page 2

TYPHOON DESIGN WIRELESS
KEYBOARD & OPTICAL MOUSE SET
2-2. Select the Channels for the Keyboard and the Mouse
a) Select Channel "1" or "2" for the Keyboard and the use the next available number for the Mouse. Do
not select the same channel as the Keyboard.
b) Put the batteries into the battery compartments of both Keyboard and Mouse.
Some keyboard or mouse may have only one channel depending on the model version.
2-3. Link the Design Wireless Keyboard and the Wireless
Optical Mouse with the Receiver (Synchronization)
a) The locations of the channel link button and
the LED indicator may differ with different
model versions.
b) Please turn on your PC. The LED indicator on
the receiver will light.
c) Press the ID Link Button on the receiver and the LED indicator will blink. The receiver is ready to
automatically link (synchronize) with the keyboard and the mouse.
d) Next press the ID Link Button at the back of the keyboard under the flipper leg. The LED light on the
receiver will blink quickly when you have successfully completed the keyboard linkage.
e) Then press the ID Link Button at the back of the mouse beside the label.
f) The LED indicator on the receiver will light steadily while you have completed the linkage
(synchronization process).
Version 2.0 All specifications and information are subject to changes without further notices.
Article Number: #40240
Link Butt on Bat tery Case
1
2
CH
Keyboard
2