TYPHOON Wireless Keyboard Optical Mouse Set User Manual

TYPHOON DESIGN WIRELESS
KEYBOARD & OPTICAL MOUSE SET
Design Wireless Keyboard Optical Mouse Set.
User's Guide
Notice: Notice:
Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the
users authority to operate the equipment.
Congratulations on purchasing the Typhoon Design Wireless Keyboard and the Wireless Optical Mouse.
Please carefully read the User's Guide to learn about the installation and the powerful functions of your
new Design Wireless Keyboard with the Wireless Optical Mouse.

1. Content of Package

a) Design Wireless Keyboard
b) Wireless Optical Mouse
c) Receiver (with PS/2 connectors)
d) Three AA Batteries for Keyboard
e) Two AAA Batteries for Wireless Optical Mouse
f) Driver CD-ROM
g) User's Guide
Optional Parts for Wireless Optical Mouse
USB to DC Cable

2. Hardware Installation

2-1. Install the Receiver with the PS/2 Connectors
a) Please turn off your PC.
b) Plug the PS/2 connectors of the keyboard and the mouse on the receiver
into the PC.
Version 2.0 All specifications and information are subject to changes without further notices.
Article Number: #40240
B
G
1