Upnp - A-MTK 2M Tiny Cube User Manual

Network Camera User's Guide

UPnP

UPnP is short for Universal Plug and Play, which is a networking architecture that
provides compatibility among networking equipment, software, and peripherals. This
device is an UPnP enabled Network Camera. If your operating system is UPnP enabled,
the device will automatically be detected and a new icon will be added to "My Network
Places." If you do not want to use the UPnP functionality, it can be disabled.
In addition, this device also provides UPnP IGD function for NAT traversal easily. Use
NAT traversal when your device is located on an intranet (LAN) and you wish to make it
available from the other (WAN) side of a NAT router. With NAT traversal properly
configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded
to the device.
UPnP:
To enable or disable the UPnP service here.
Friendly Name:
To show the friendly name of this device here.
UPnP NAT Traversal
When enabled, the device will attempt to configure port mapping in a NAT router on your
network, using UPnP™. Note that UPnP™ must be enabled in the NAT router first.
Port Range:
40/96