Setup; Tuning - Panasonic DMR-EX75 Operating Instructions Manual

FUNCTIONS
FUNCTIONS

Setup

Edit Profiles
Auto-Setup Restart
Digital
Add New DVB Services

Tuning

Signal Condition
Disc
Analogue
Picture
Manual
Sound
Download from TV
Display
SELECT
Connection
Others
ENTER
Auto-Setup Restart
Warning--all stored tuning data
will be lost !
Do you want to proceed ?
Yes
Add New DVB Services
Please wait ! Ch 5
Prog. Net ID TS ID Quality
Channel Service Name
1 23 ZDF 12302 12289
2 23 Info/3sat 12302 12289
3 23 Doku/KiKa 12302 12289
4 23 RTL Television 12305 11397
5 23 RTL2 12305 11397
45 new services found.
ENTER
RETURN
1 ZDF DVB CH23
Signal Quality 0
Signal Strength 0
RETURN
Download from TV
Warning--all currently
stored stations will be
replaced by new ones !!
Yes
60
Setup
SETUP
To Others
Setup menu overview
Press FUNCTIONS.
Select [To Others] with
Select [Setup] with
Select the desired sub menu with
Select the desired setting with
Select the desired option with
Follow the menu guide. The unit saves your settings.
Press RETURN multiple times to exit the menus.
TAB
RETURN
Tuning
Creating new profiles
You can find the description of this setting on page 20.
Tuning
Auto-Setup Restart
Select [Yes] with
To cancel the process, select [No] with
Press RETURN to prematurely end the station search.
Press RETURN to prematurely end the station search. All station settings and all
No
created profiles are deleted.
Tuning
Add New DVB Services
69
The unit searches for new digital stations.
The station search begins automatically.
9
The bar over the table shows you the search progress. At the end of the search,
9
9
the number of found new digital stations appears.
9
Press RETURN to stop the station search prematurely.
9
The channels found before stopping are not saved.
Tuning
Signal Condition
The display in the [Signal Condition] menu shows the quality and strength of
the selected digital station.
10
You can select and check the stations consecutively with CH .
10
The signal condition is only displayed for digital stations.
CH +
CH –
Signal Quality
Display red: signal quality below 2: the signal quality is poor so that there may be
interference in the pictures and sound.
Display orange; signal quality 2-5: the signal quality is basically adequate, but brief
interference in the pictures and sound is possible in isolated cases.
Display green; signal quality over 5: optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. 0 means signal strength = 0 %, 10 means
signal strength = 100%.
The signal strength can also be > 100 % (> 10). In this case, the display is red.
Tuning
Download from TV (with Q Link or similar functions)
Select [Yes] with
To cancel the procedure, use to select [No] and confirm with ENTER or press
No
RETURN.
To prematurely end the data transfer, press RETURN.
and confirm with ENTER.
and confirm with ENTER.
and switch to setup with .
and confirm with ENTER.
and confirm with ENTER.
Edit Profiles
Auto-Setup Restart
and confirm with ENTER. The station search begins.
and confirm with ENTER or press RETURN.
Add New DVB Services
Signal Condition
Download from TV
and confirm with ENTER. Data transfer begins.
ENTER
ENTER
ENTER
ENTER
73
ENTER