Advertisement
UC-TS003 USER'S MANUAL
Adjustment of VGA mode and position of television:
The position of television will change when VGA mode changed (for example: from
640X480 with 16 bits color to 640X480 with 24 bits color.). UC-TS003 provides the
feature to adjust and save position of television by on-board switches.
The green LED will be "turn-on" when any switch was pressed. The adjusted function
is accepted when the switch is released and green LED is turn-off.
The
red
LED is always on until the input power failure.
Operation guide (make sure first the all H/W configuration was correct):
Step1: Boot system and set the VGA mode (resolution and color depth) as you want.
Step2: Adjust the position of television by these keys:
MOVE UP/ DOWN/ LEFT/ RIGHT.
Step3: Press the SAVE key to save setting and the green LED will flash 3 times.
Step4: Shutdown the system and turn-on again to verify the position of television.
Create by RobertLiou, 2002/09/19.
UNICORN-COMPUTER
Rev: 1.0
6
Advertisement
