Setting Up Your Tv - JVC HV-29WZ Instructions Manual

Setting up your TV

CAUTION
• Turn off all the equipment including the
TV before connecting anything.
1 Connecting the aerial
and VCR
• Aerial cable is not supplied. Use a good
quality 75-ohm coaxial cable.
• Read the manual that came with the VCR
before connecting.
If not connecting a VCR (see fig.A):
Connect an aerial cable to the aerial
socket on this TV .
If connecting a VCR (see fig.B):
1 Connect the aerial cable to the
aerial input socket on the VCR,
and connect the VCR and TV
with another aerial cable.
2 Connect the VCR's VIDEO OUT
(video output) jack and the TV's
VIDEO jack with a video cable.
To connect a VCR to the TV with an S-VIDEO
cable:
Connect the VCR's S-VIDEO OUT (S-VIDEO
output) connector and TV's S connector with
an S-VIDEO cable A, instead of connecting
with a video cable .
3 Connect the VCR's VIDEO OUT
(audio L/R output) jacks and the
TV's AUDIO jacks (L/MONO and
R) with an audio cable.
• If the VCR's audio output is in mono,
connect the VCR's AUDIO OUT (audio
output) jack and the TV's AUDIO L/
MONO jack with an audio cable.
• You can use the AV COMPU LINK
function if your VCR has an AV COMPU
LINK terminal. For details, see
"Connecting AV COMPU LINK Supported
Devices" on page 33.
Fig.A
Back of the TV
AUDIO
R L/MONO VIDEO S
OVER
C C Y/VIDEO
R B
R AUDIO L/MONO COMPONENT
R L VIDEO
AUDIO
AV COMPULINK
Fig.B
Back of the TV
A
AUDIO
R L/MONO
C C
R B
R AUDIO L/MONO
R L
AUDIO
AV COMPULINK
VIDEO-1
VIDEO-2
VIDEO-3/
OUTPUT
VIDEO S
OVER
VIDEO-1
VIDEO-2
Y/VIDEO
VIDEO-3/
COMPONENT
OUTPUT
VIDEO
3