Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Medema Mini Crosser M joy
Summary of Contents for Medema Mini Crosser M joy
- Page 1 medemagroup medemagroup P9-0158-B ver. 1.0.2 - July 2012...
- Page 2 Medema Production A/S Serial number: ___-______________-______-_______ Delivery date: ________________ Year 20______ This vehicle was supplied by: Date: User guide P9-0158-B 2 of 48 Version 1.0.2/2011...
-
Page 3: Table Of Contents
Securing to vehicle fl oor with belts ........32 Transporting by plane ............35 Towing ..................35 Dimensioned drawing, Mini Crosser M Joy 4W ....36 Introduction to seats - Ergo Standard ......... 37 Introduction to seats - Mando ..........39 Troubleshooting .............. -
Page 4: Symbols
For safety reasons the vehicle must not be lent to persons who are not completely familiar with it. The vehicle is designed for one person only. The Mini Crosser M Joy has been designed for users weighing max. 150 kg. Joystick... -
Page 5: Introduction
User Manual carefully. As a new user, you should pay particular attention to the section entitled “Driving the Mini Crosser M Joy”. The Mini Crosser M Joy is designed for safe travel for at least 10 years, up to a max. of 5,000 hours, provided it is serviced and safety-checked every year, corresponding to 500 hours of operation. -
Page 6: Declaration Of Conformity
Medema Production A/S Declaration of conformity Medema Production A/S hereby declares that: Machine: Mini Crosser Use: (Prescribed use in User Manual) Model No: M Joy Complies with the Medical Device Directive 93/42/EEC The product is made in accordance with the harmonized standard EN 12184 - Electrically powered wheelchairs, scooters and their chargers. -
Page 7: Designations
Medema Production A/S Designations The following designations refers to the explanation later in the instruction book. Headrest (not shown) (Extra) Control panel Joystick Charging socket Handbrake Finger screw Release handle forw. / backw. Seat rotation Indicator lights Eye for restraints... -
Page 8: Joystick Parts
Medema Production A/S Joystick parts Dynamic G90T Dynamic G90A Start/stop button (push button) Start/stop button Start/stop button (toggle switch) Display Display Select program Gear down/up Display for seat functions (not available) Display for seat functions (not Battery indicator available) Battery indicator... -
Page 9: Using The G90T And G90A
Medema Production A/S Using the G90T and G90A Speed selection with G90T Speed selection with G90A To start the scooter: To start the scooter: Press button 1A or use toggle Press button 1 and wait for the switch 1B battery indicator to stabilise (3-5... -
Page 10: Safety Check Joystick
Medema Production A/S Safety check Joystick Daily safety check: The electronic system has an integrated safety check which runs up to 100 times per minute. To supplement this check, you should carry out the following regular checks. • Switch off the electronic system (no lights in the display) •... -
Page 11: General Care And Maintenance
Medema Production A/S General care and maintenance A Mini Crosser M Joy does not require much maintenance. It should be kept in a generally good condition, however. The following should be checked regularly: • Tyre pressure (if pneumatic tyres are fi tted) •... -
Page 12: Insurance
Medema Production A/S Annual The Mini Crosser M Joy is designed for safe travel for at least 10 years, up to a max. of 5,000 hours, provided it is serviced and safety-checked every year, corresponding to 500 hours of operation. -
Page 13: Preparations / Adjustments Prior To Use
Medema Production A/S Preparations / Adjustments prior to use Adjusting the height of the seat Lift the seat off and remove the rear cover. Press the release button out and adjust the seat tube to the desired position. See the picture on the next page. Check that the seat height is correct and press the release button in again. -
Page 14: Electric Seat Adjustment
Medema Production A/S Seat tube Release Seat tube in top position. There are fi ve holes for adjusting the seat tube. The release must be in a hole for the seat to be stable. Electric seat adjustment The Mini Crosser can be fi tted with electric seat adjustment as an optional extra. -
Page 15: Seat Rotation
Medema Production A/S Seat rotation Pull the release lever back. The seat can be rotated 90° to either side. When the lever is released, it engages with the seat and holds it in place at 45° intervals. Other seats that can be supplied for the Mini Crosser work on similar principles. -
Page 16: Serial Number
Medema Production A/S Serial number All vehicles have a serial number plate showing the year of production, and serial number. The same serial number can also be found on the front of the User Manual. Please quote this number when making inquiries about servicing, spare parts, etc. -
Page 17: Driving The Mini Crosser M Joy
Mini Crosser. In general the following method should be followed: • Make sure that the Mini Crosser M Joy is off (switch turned to 0) • Make sure that the brake is on. (Lever for disengaging motor in top position.) •... - Page 18 Medema Production A/S Braking systems There are three braking systems on the Mini Crosser: • Motor brake - adjusts vehicle speed also when going downhill. • Magnetic brake - the magnetic brake is automatic and engages when the Mini Crosser stops. In an emergency, the Mini Crosser can be stopped instantaneously by turning of the joystick.
- Page 19 Medema Production A/S Reduce speed immediately if you feel you are losing control. Always use the indicators when changing direction. Check that lights and indicators are working before driving off. Use your lights when driving after lighting-up time. ALWAYS switch the scooter off when it is not in use. I/O button.
- Page 20 Medema Production A/S Always drive straight up/down kerbs and ramps. Never at an angle. See the illustrations on the following pages. • Try braking at different speeds and notice the stopping distances. • If possible, try driving on different surfaces (road, grass and gravel).
- Page 21 Medema Production A/S Electromagnetic compatibility If the Mini Crosser starts making involuntary movements or if the brakes are released, turn the Mini Crosser off as soon as it is safe to do so. In certain circumstances a Mini Crosser can set off shop alarms.
-
Page 22: Specifi C Driving Situations
Medema Production A/S Specifi c driving situations Up kerbs • Stop at right angles to the kerbstone about 5-10 cm away from it. Keep an eye on other road users. • Lean forwards. • Accelerate moderately so that your vehicle can overcome the obstacle. - Page 23 Medema Production A/S Up a ramp/hill • There is a risk of tipping over backwards if the seat is pushed back when you start driving up a slope, e.g. a ramp. • Pull the seat forward! Check that any ramp is stable.
-
Page 24: Anti-Tilt Wheels / Stabilisers
Medema Production A/S Across a slope • Lean into the slope. • Avoid sudden and sharp movements. This is particularly relevant when reversing. • Always drive at low speed. Anti-tilt wheels / stabilisers The Mini Crosser is a very stable vehicle. HOWEVER, in the case of incorrect weight distribution or careless driving there is a risk of tipping over. -
Page 25: Batteries
Medema Production A/S Batteries The Mini Crosser uses sealed, maintenance-free GEL batteries (Exide 12 V/56 Ah or AGM 12 V/75 Ah). They do not generate gas and do not have to be topped up with water. Charging Please NOTE that the Mini Crosser can be equipped with several types of charger (ask your dealer for information on the various types). - Page 26 Medema Production A/S Avoid draining the batteries completely. We recommend charging the batteries in a heated room. If it is not possible to do this every day, it is a good idea to charge the Mini Crosser in a heated room (approx. 20°C) once a week.
-
Page 27: Battery Disposal
The charger must be kept dry, but should not be covered when in use. In the case of long-term storage we recommend covering the Mini Crosser M Joy to protect it from dust, rain and sunlight. Cleaning Clean the Mini Crosser M Joy with a damp cloth. If necessary, wipe dry with a chamois leather. -
Page 28: Changing The Wheels
Medema Production A/S Changing the wheels If you get a puncture in one of the pneumatic tyres or if a tyre is so badly worn that it needs to be replaced, follow the instructions below. Tyres and inner tubes can be purchased from the authorised dealer who supplied the Mini Crosser. -
Page 29: Fuses
2-5 minutes. • Mini Crosser M Joy also features a built-in fuse in the steering box. This will turn off, for example. hard driving in wet grass or very soft ground - wait 5 secs. Before you turn on the Mini Crosser again. -
Page 30: Brakes
Medema Production A/S Brakes There are three braking systems on the Mini Crosser M Joy: • Motor brake • Magnetic brake • Handbrake • Motor brake: adjusts vehicle speed also when going downhill. • Magnetic brake: automatic and comes on when accelerator is released. -
Page 31: Disengagement
Medema Production A/S Disengagement • Turn the vehicle off on the joystick (I/O). • Push the disengagement lever at the back down. The motor brake is now disengaged and the vehicle can be pushed or towed, but not driven. NOTE! The motor brake must never be disengaged on sloping terrain. -
Page 32: Securing To Vehicle Fl Oor With Belts
Medema Production A/S Securing to vehicle fl oor with belts Dahl Engineering belt set for securing in motor vehicles. Item No. C2-0242 ALWAYS use four belts at the back and two at the front. The belts must always be attached to approved fi ttings in the vehicle and the four eyes welded to the scooter. - Page 33 Medema Production A/S Attachment point Attachment point Greater than the anchorage points on the Greater than scooter the anchorage Centre line points on the scooter User guide P9-0158-B 33 of 48 Version 1.0.2/2012...
- Page 34 Medema Production A/S For transport in an estate car, the Mini Crosser must be secured with belts to the fl or of the car Eye for restraints The Mini Crosser can be used as a seat during transport in a van or bus, provided it is securely anchored to the vehicle with approved four-point belts attached to the restraint points provided on the Mini Crosser.
-
Page 35: Transporting By Plane
Medema Production A/S Remember to turn the Mini Crosser off during transport. (I/O button). However, if at all possible, we recommend that the user occupies one of the seats in the motor vehicle. All other things being equal, this is safer. -
Page 36: Dimensioned Drawing, Mini Crosser M Joy 4W
Medema Production A/S Dimensioned drawing, Mini Crosser M Joy 4W M : 370 mm : 290 mm 1030 mm 1420 mm 1500 mm User guide P9-0158-B 36 of 48 Version 1.0.2/2011... -
Page 37: Introduction To Seats - Ergo Standard
Medema Production A/S Introduction to seats - Ergo Standard Lever for seat rotation Pull the lever back to release the seat. The seat can then be turned 90° to either side with a stop every 45°. The lever is spring-loaded and the seat locks automatically when the lever is released. - Page 38 Medema Production A/S Adjusting the angle of the backrest The angle of the backrest can be adjusted by about 30°. This can be done by undoing the adjusting screw and changing the position of the spacer. Do the screw up again after making the adjustment.
-
Page 39: Introduction To Seats - Mando
Medema Production A/S Introduction to seats - Mando Adjusting the angle of the backrest: The angle of the backrest can be adjusted by about 30° by raising this lever. Adjusting the angle of the armrest: The angle of the armrest can be adjusted by turning this screw. -
Page 40: Troubleshooting
Medema Production A/S Troubleshooting The following is a list of various problems that, in our experience, may occur. The list gives possible causes and remedies. Problem Possible causes Remedy The Mini Crosser will not The joystick has not been Turn on the joystick (I/O) turned on (I/O). -
Page 41: Troubleshooting The Dynamic
Medema Production A/S Problem Possible causes Remedy The “ready” lamp on the The fuse in the charger Contact supplier. charger lights up even has blown. when partly discharged The switch in the charging Contact suppliers - read batteries are connected. - Page 42 Medema Production A/S Status light fl ashes with 9 fl ashes per Electronic fault. Contact a competent cycle. service engineer. (HMC or therapist). Status light fl ashes with 10 fl ashes per Electronic fault. Contact a competent cycle. service engineer. (HMC or therapist).
-
Page 43: Programming
Medema Production A/S Programming NOTE! For safety reasons, modifi cations may only be made by trained personnel, such as Mini Crosser service engineers and consultants or authorised service personnel at mobility centres, etc. Technical data Technical data M Joy General information:... - Page 44 Medema Production A/S Technical data M Joy T-127-3-068 13x3.00-8” ext. Ø340 mm Wheel black puncture free - T and M-model Classifi cation, ISO Class C Seats: Effective seat width: Ergo Standard 40,45,50,55,60 cm Spinalus 40, 45, 50 cm Mando 48 cm...
- Page 45 Medema Production A/S Technical data M Joy 110/115 Ah batteries Option Maximum driving distance with new batteries at +20° on fl at, 75 km fi rm surface Optimum battery capacity is reached after approx. 20 charges / discharges. Battery type:...
-
Page 46: International Addresses
Medema Production A/S International addresses Australia / New Zealand Germany Pride Mobility Products Baden Württemberg Bavaria Tel: +61 3 9706-4611 Draisin GmbH Fax: +61 3 9706-4622 Tel: (+49) 0 78 41 66 77 0 Email: prideaustralia@pride-mobility.com.au Fax: (+49) 0 78 41 66 77 88 Internet: www.pridemobility.com/international/Australia/australia.asp... - Page 47 Medema Production A/S Holland Switzerland Richard van Seenus Nederland B.V. Degonda Rehab SA Tel: +31 (0) 36 53 20 450 Tel: +41 033 345 83 00 Fax: +31 (0) 36 53 21 308 Fax: +41 033 345 83 01 Email: info@vanseenus.nl Email: info@turbo-twist.ch...
- Page 48 medemagroup...