Applying Power To The Sonicwall Tz 150 Wireless - SonicWALL TZ 150 Getting Started Manual

Other Information
SonicWALL Management Interface
To access the SonicWALL TZ 150 Wireless Web-based
management interface. These are the default settings, which you
can change:
User Name:
Password:
Applying Power to the
2
SonicWALL TZ 150 Wireless
Plug the power supply into back of the security appliance
and into an appropriate power outlet.
The Power LED
plug in the SonicWALL TZ 150 Wireless. The Test LED
light up and may blink while the appliance performs a series of
diagnostic tests. When the Test light is no longer lit, the security
appliance is ready for configuration.
If the Test LED remains lit after the SonicWALL TZ 150 Wireless
has booted, Restart the security appliance.
For more trouble shooting information, refer to the
SonicOS Standard Administrator's Guide.
Page 4
admin
password
on the front panel lights up green when you
may