Basic Connections - JVC DynaPix LT-26DX7BJ Instructions Manual

Basic connections

Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.
 Connect with other devices  "Connecting external devices" (P. 10)
Connect the aerial
After all the connections have been made, insert the plug into an AC outlet.

Care when setting
 Power requirements
 Connect the power cord only to a 220-240V,
50/60Hz AC outlet.
 When attaching the TV to the wall, use the
optional JVC wall mounting unit
Consult a qualified technician.

See the included manual on mounting procedures.

JVC assumes no responsibility for damage due to

improper mounting.
200mm × 200mm mount which conforms to VESA

standards.
8
AERIAL
 Installation requirements
To avoid overheating, ensure the unit has ample

room.
200mm
150mm 50mm 150mm 50mm
Connect a VCR / DVD recorder
EXT-2
EXT-1
VCR / DVD recorder
After all the connections have been made, insert the plug into an AC outlet.

Connect "T-V LINK" compatible recording device to "EXT-2".

"T-V LINK" "What is "T-V LINK"?" (P. 12)
 
Watch pay-per-view
Contract with a broadcasting company beforehand.
1 Unplug the power cord
2 Insert the Viewing Card into the CAM.
3 Insert the CAM.
4 Plug the power cord, and turn the power on.
Set pay-per-view (P. 40)
 
The CAM and Viewing Card will be sent by the broadcasting

company after contracting with them.
AERIAL
Conditional
CAM
Access
Module
Viewing
Card
9