Basic connections
Please read the user manuals of each device before setup.
It is necessary to connect an aerial to watch TV.
Connect with other devices
"Connecting external devices"
Connect the aerial
After all the connections have been made, insert the plug into an AC outlet.
Care when setting
Power requirements
Connect the power cord only to a 110-240V,
50/60Hz AC outlet.
When attaching the TV to the wall, use the
optional JVC wall mounting unit
Consult a qualified technician.
See the included manual on mounting procedures.
JVC assumes no responsibility for damage due to
improper mounting.
400mm x 200mm mount which conforms to VESA
standards (200mm).
7
(P. 13)
AERIAL
Installation requirements
To avoid overheating, ensure the unit has ample
room.
200mm
150mm
50mm
150mm
50mm
Connect a VCR / DVD Player
(Y)
(Pr)
(Pb)
(R)
(L)
VCR / DVD Player
After all the connections have been made, insert the plug into an AC outlet.
If both composite and S-VIDEO cables are connected, S-VIDEO will be enable.
Tidying the cables
To remove the cable cover, refer to back of the cover.
AERIAL
VIDEO-1
8