Table of Contents
Advertisement
S2071
/ S4071
H.264 Video Server
2ch
4ch
NOTE：
Please be careful and make sure there is no any interrupted during the process of the
firmware upgrade because of the firmware is burned into the Flash Rom then.
System will probably damaged seriously and need to rest to the factory default for repair
it if the power cable has been removed or becomes loose during the upgrade.
It is not recommend you to upgrade the firmware in a wireless network environment
because of the unstable packet transmission may conduce to data loss.
It is not necessary for you to restart the camera by manual after the firmware upgrade
completed. The camera will reboot automatically after 60 seconds (Reboot OK), and it
will open the IE Browser and filled in the IP address (The original IP address remains
undeleted).
- 97 -
Advertisement
Table of Contents
