Ptz - 3Svision S20712ch User Manual

S2071 / S4071
2ch

PTZ

PTZ Camera Port Setting
Camera Driver: S2071/S4071 supports the PTZ control of those analog PTZ cameras
PTZ Driver Manager
In the Camera Driver column, list all the drivers that are installed in the video server.
Select Delete to eliminate any selected driver.
PTZ Driver Upload
Upload the PTZ drivers from www.3Svision.com for more camera drivers which are
supported.
Serial Port Setting
Port:
Port Mode:
Baud rate:
Data bits:
Stop bits:
Parity:
4ch
use the drivers of Pelco-D, Pelco-P. Refer to the user manual of your
PTZ cameras, and you will know which driver to select. Moreover,
select the serial number (address) of the targeted PTZ camera for
controlled setting. If the selection is none, please upload the PTZ
driver first.
COMO
RS485
Select the measure of the symbol rate from 2400, 4800 and 9600.
Select the number of bits used to represent one character of data from
7 and 8.
Select the bit used in asynchronous communications to indicate the
end of a piece of data from 1 and 2.
Select the parity from None, Even and Odd.
- 60 -
H.264 Video Server