Figure 4.34 Removing The Power Membrane; Power Membrane; Removing The Power Membrane; Installing The Power Membrane - Toshiba Satellite Maintenance Manual

4.19

Power Membrane

Removing the Power Membrane

Remove the power membrane according to the following procedures and Figure 4.34.
1. Disconnect the power membrane from the motherboard.
2. Peel off and remove the power membrane, taking care not to damage or tear it.

Installing the Power Membrane

Install the power membrane according to the following procedures.
1. Seat the power membrane in the correct place and adhere it to the lower logic assembly.
2. Connect the power membrane to the motherboard.
NOTE: Where possible reuse the power membrane. If the power membrane is faulty or is
compromised during removal install a new power membrane.
Satellite A660/ProA660 Series Maintenance Manual

Figure 4.34 Removing the power membrane

4 Replacement Procedures
4-44