Front Panel Lock; Position Adjustment - JVC 0805TNH-II-IM User Manual

Initial Setup

Front Panel Lock

This allows you to lock the keys on the front of the TV, so that a child may not accidentally
change your viewing preferences.
Press the M
To FRONT PANEL LOCK
π †
è
To turn ON or OFF
Press the M
You can turn off this feature in the following ways:
• Unplug the power cord, and plug it back in. Do this if
your batteries die, or you lose your remote control.
• Use the remote control.
• Press the M button on the front of the TV for more than 3 seconds. In this case, the OSD
ENU
for FRONT PANEL LOCK will appear.
Note:
• To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will
remain ON.

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the M
To POSITION ADJUSTMENT
π †
è
To enter
è
To adjust the position
π †
Press the M
Notes:
• To reset the adjustment to the center, press the
O button.
K
• When the arrow disappears, while you are adjusting the position, the position is at it's
maximum limit.
• If you select regular size with aspect, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
36
button
ENU
button when finished
ENU
button
ENU
button to finish
ENU
INITIAL SETUP
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
POSITION ADJUSTMENT
POWER INDICATOR
NEXT PAGE
SELECT OPERATE
RESET
OPERATE
OK
ON
OFF
OFF
(1/3)
EXIT
MENU
EXIT
MENU