Replacing The Lamp - JVC 0706TKH-MW-VPC Instructions Manual

Replacing the lamp

The TV uses a lamp to project the picture onto the screen. When the lamp has blown or when the
picture becomes dark, replace the lamp.
Before replacing the lamp, read all the instructions carefully.
If you feel unsure about replacing the lamp yourself
Prepare the Replacement Lamp Kit
For purchasing the Replacement
Lamp Kit, consult your retailer.
Use only the specifi ed
!
Replacement Lamp Kit!
This lamp is for use with JVC
model televisions. Using the
lamp with a different television
or other product could cause a
malfunction and/or damage to
the television or lamp.
When the lamp is near to its end...
The following message appears on the screen.
Lamp needs to replaced.
Refer to instructions book for replacement
instructions.
After replacing the Lamp, please reset
timer in the TV menu.
Press OK, if you do not want to see this
message again.
After the usage time of the lamp has reached to 6500 hours, this message appears every time you turn on
the TV.
Possible causes of shortened lamp life
Turning on/off the TV repeatedly in a short amount of time
Keeping the TV turned on for more than 24 hours consecutively
4
Consult your retailer
Preparation
Replacement Lamp Kit:
TS-CL110C
• High-pressure mercury lamp
To make the message disappear
Before replacing the lamp, read all the instructions.
Turn the TV off
1
2 Wait for at least 1 hour until the lamp has fully cooled
Remove the lamp unit
3
Never replace the lamp before it has fully cooled!
!
The lamp becomes extremely hot while in use, which may cause a burn. After turning off
the TV, wait for at least 1 hour.
Never attempt to replace the lamp with the TV plugged in!
!
Attempting to replace the lamp with the TV plugged in could lead to a severe electrical
shock.
Remove the lamp cover
1
Remove the lamp unit
2
Loosen
HD-Z70RF7 is used for explanation on the illustrations on this Instructions.
Wait until the LAMP Unplug the TV
indicator stops blinking
LAMP indicator and Power
lamp are refered as "LAMP
LED" and "POWER LED"
on the Instructions of
Replacement Lamp Kit TS-
CL110C.
If you feel any warmth
!
near the lamp, DO NOT
TOUCH IT!
Philips head type screw
driver (cross-head type)
Remove
Do not drop
the lamp!