JVC 0208KTH-II-IM User Manual page 17

Initial setup (Continued)
4) Set TV attribute
Set TV Attribute
Tuner Mode
Start Scan
Tuner Mode
* If you use a set top box (satellite or cable box), press "Exit" to
Cable Users: After your auto tuner setup is complete, you may,
(depending on the type of hookup), have only 1 channel, usually
2, 3 or 4 in the auto tuner memory. This is normal.
"Thank you! Setup is now complete"
Air
Exit
Choose Air (antenna) or Cable
skip this step.
Setup
1 Change settings
2 Select an item
3 Select "Start Scan"
4 Start scanning
channels
17